ECO LAB.Arise PNU, 같이 더 높게
  • HOME
  • > Achievements
  • > Publication

Publication

/WEB-INF/jsp/k2web/com/cop/site/layout.jsp
ecolab_sub

Books & Book Chapters

  1. S. Lee and S. J. Park, “Process Optimization in Component Manufacturing“, Advances in Powder Metallurgy: Properties, Processing and Applications, edited by Chang and Zhao, Woodhead Publishing Limited, 2013
  2. O. Valmikanathan, S. J. Park, S. Lee, R. M. German, and S. V. Atre, “Sintered Nanoscale Powders,” Applications of Nanomaterials, edited by Ramesh S. Chaughule and Shrikant C. Watawe, American Scientific Publishers, 2011.
  3. S. Lee, Why is C so difficult to learn?, Mincom Publishing Co., Seoul, Korea, Jun., 1995.
  4. S. Lee, The Revolution of Operating Systems, Crown Publishing Co, Seoul, Korea, Mar., 1993.

Refereed Journal Publications

  • R. Vadivel, S. Shanmugam, B. Unyong, P. Hammachukiattikul, Keum-sik Hong and Gyu M. Lee, “Stabilization of Delayed Fuzzy Neutral-type Systems Under Intermittent Control”. INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS. 2021. Vol. 19. No. 3, pp. 1408-1425

    Akash Singh, Amrit Das, Uttam Bera, Gyu M. Lee, “Prediction of Transportation Costs Using Trapezoidal Neutrosophic Fuzzy Analytic Hierarchy Process and Artificial Neural Networks”. IEEE Access, 2021

  • Gyu M. Lee, Xuehong Gao, “A Hybrid Approach Combining Fuzzy c-Means-Based Genetic Algorithm and Machine Learning for Predicting Job Cycle Times for Semiconductor Manufacturing”. Applied Science, 2021, Vol.11.

  • Saravanan Shanmugam, Ali M. Syed, R. Vadivel, Gyu M. Lee, “Finite-Time H∞ State Estimation for Markovian Jump Neural Networks with Time-Varying Delays via an Extended Wrtingers Integral Inequality”. Mathematical Problems in Engineering. 2021, No. 5558955

  • Amrit Das, Gyu M. Lee, “A Multi-Objective Stochastic Solid Transportation Problem with the Supply, Demand, and Conveyance Capacity Following the Weibull Distribution”. Mathematics, 2021. Vol. 9

  • Hyunpae Lim, Gyu M. Lee, Ivan Kristianto Singgih, “Multi-Depot Split-Delivery Vehicle Routing Problem”. IEEE Access, 2021

  • Moddassir Khan Nayeem, Gyu M. Lee, “Robust Design of Relief Distribution Networks Considering Uncertainty”. Sustainability. 2021. Vol. 13

  • Yanjie Zhou, Gyu M. Lee, “A Bi-objective Medical Relief Shelter Location Program Considering Coverage Ratios”, International Journal of Industrial Engineering: Theory, Applications and Practice, 2020, Vol. 27. No. 6. Pp. 971-988

  • Mohammad Idil Haq Amir, Fifi Alfiana Rosyidah, Gyu M Lee, “A FORMAL MODEL OF THE AGENT-BASED SIMULATION FOR THE EMERGENCY EVACUATION PLANNING”, International Journal of Industrial Engineering: Theory, Applications and Practice, 2020. Vol 27. No. 4. Pp. 645-664

  • Saravanan Shanmugam, Syed Ali Muhammed and Gyu M. Lee, “Finite-time extended dissipativity of delayed Takagi-Sugeno fuzzy neural networks using a free-matrix-based double integral inequality”. NEURAL COMPUTING & APPLICATIONS, 2020. Vol 32. No. 12. Pp. 8517-8528

  • Gao, Xuehong, and Gyu M. Lee. "Moment-based Rental Prediction for Bicycle-sharing Transportation Systems Using a Hybrid Genetic Algorithm and Machine Learning." Computers & Industrial Engineering. 2019. Vol. 128. Pp. 60-69.

  • Harun Ozturk and Gyu M. Lee. “A PRODUCTION LOT SIZING MODEL CONSIDERING QUALITY CONTROL, REWORK, AND SHORTAGES”. International Journal of Industrial Engineering-Theory, Applications and Practice, 2018. Vol. 25, No. 6, pp. 843-861. 

  • Sungwoo Kim, Youngchul Shin, Gyu M. Lee, Ilkyeong Moon. Network repair crew scheduling for short-term disasters. Applied Mathematical Modelling, 2018. Vol. 64, pp510-523.

  • Gu J, Zhou Y, Das A, Moon I, Lee GM. Medical relief shelter location problem with patient severity under a limited relief budget. Computers & Industrial Engineering. 125,pp 720-728, 2018.

  • Kim, S., Shin, Y., Lee, G.M. and Moon, I. Early stage response problem for post-disaster incidents. Engineering Optimization, 50(7), 1198-1211, 2018.

  • Zhou Y, and Gyu M. Lee. Linking soft computing to art: introduction of efficient k-continuous line drawing. Applied Soft Computing. Vol. 68, pp. 932-943, 2018.

  • Tuladhar, U. M., Gyu M. Lee, and Seokyoung Ahn. "A novel coarse-to-fine registration approach for aligning partially overlapped 3D scanned data." International Journal of Computer Integrated Manufacturing. 31(8), 718-726, 2018.

  • Xuehong Gao, Yanjie Zhou, Muhammad Idil Haq Amir, Fifi Alfiana Rosyidah, Gyu M. Lee, “A Hybrid Genetic Algorithm for Multi-emergency Medical Service Center Location-allocation Problem in Disaster Response”, International Journal of Industrial Engineering-Theory, Applications and Practice, Vol. 24, No. 6, pp. 663-679, 2017.

  • Yanjie Zhou,Gyu M. Lee, “A Lagrangian Relaxation-Based Solution Method for a Green Vehicle Routing Problem to Minimize Greenhouse Gas Emissions” Sustainability Vol. 9, No 5, pp. 776:1-17, 2017.
  • Dong Yong Park, Gyu M. Lee, Young-Sam Kwon, Yong Jun Oh, Seong Lee, Myeong-Sik Jeong and Seong Jin Park, “Investigation of Powder Size Effects on Sintering of Powder Injection Moulded 17-4PH Stainless Steel”, Powder Metallurgy, Vol. 60, No 2, pp. 139-1148, 2017.
  • Sushanta Tripathy, Satyabrata Aich, Anurup Chakraborty and Gyu M. Lee, “Information Technology is an Enabling Factor Affecting Supply Chain Performance in Indian SMEs: A Structural Equation Modelling Approach”, Journal of Modelling in Management, Vol. 11, No. 1, pp. 269-287, 2016
  • Kyoungseok Na and Gyu M. Lee, “Agent-based Simulation of Emergency Evacuation for Nuclear Plant Disaster”, International Journal of Industrial Engineering-Theory Application and Practice, Vol. 23, pp. 445-448, 2016
  • Ferrer, Geraldo, Gyula Vastag and Gyu M. Lee. “Supply Chain Decisions in Governmental Organizations”, Decision Sciences, Vol. 47, pp. 995-997, 2016.
  • Harun Ozturk and Gyu M. Lee, “An Economic Order Quantity Model for Lots Containing Defective Items with Rework Option”, International Journal of Industrial Engineering-Theory Applications and Practice, Vol. 22, pp. 683-704, 2015
  • Bobae Kwon and Gyu M. Lee, “Spatial scheduling for large assembly blocks in shipbuilding”, Computers & Industrial Engineering, Vol. 89, pp. 203-212, 2015
  • Ivan Singgih and Gyu M. Lee, “Lower and Upper Bounds for Military Deployment Planning Considering Combat”, International Journal of Industrial Engineering-Theory Application and Practice, Vol. 21, pp. 408-420, 2014
  • Gyu M. Lee, “ System Engineering Approach to Build an Information System for Emergency Cesarean Deliveries.”, International Journal of Industrial Engineering-Theory Application and Practice, Vol. 20, pp. 589-600, 2013
  • K. C. Kim, J.U. Sun and S. Lee, "Endosymbiotic Evolutionary Algorithm to Vehicle Routing and Scheduling with Delivery and Installation ", 2011 (submitted to Flexible Services and Manufacturing)
  • D.Y. Park, S. Lee, S-J. Park, Y-S. Kwon, and I. Otsuka, “Effects of Particle Sizes on Sintering Behavior of 316L Stainless Steel Powder”, Metallurgical and Materials Transactions A, Vol. 44, No. 3, pp. 1508-1518, 2012.
  • K.H.Kate, V. P. Onbattuvelli, R. K. Enneti, S. Lee, S-J. Park, and S. V. Atre, “Measurement of Powder-Polymer Mixture Properties and Their Use in Powder Injection Molding Simulations for Aluminum Nitride”, Journal of Materials, Vol. 64, No. 9, pp. 1048-1058, Sept. 2012.
  • N. Monfared, S. Varadarajan, J.P. de Souza, S. Lee, and S.V. Atre, “Effect of Surface Preparation On The Nanoporous Structure of Anodized Alumina”, Tecnologia em Metalurgia, Materials e Mineracao, 2012 (accepted).
  • S.Lee, “Dynamic Capacitated Facility Location Problem on the Multi-Commodity Supply Chain”, Journal of the Korean Institute of Industrial Engineers, Vol. 38, No. 2, pp. 107-115, June 2012.
  • B. K. Paul, B. S. Abhinkar and S. Lee, "High pressure hermetic compression seals for embedding elastomeric membrane microvalves in polymer microfluidic devices", Precision Engineering, Vol. 35, No. 2, pp. 348-354, April 2011.
  • S. Lee, S. Ahn, C. J. Whang,S. J. Park, S. V. Atre, J. Kim, and R. M. German, "Effects of Process Parameters in Plastic, Metal, and Ceramic Injection Molding Processes", Korea-Australia Rheology Journal, Vol. 23, No. 3, pp. 127-138, September 2011.
  • S. Lee, “A Genetic Algorithm for the Container Pick-Up Problem”, IE Interafaces, Vol. 24, No. 4, pp. 362~372, December 2011.
  • K. C. Kim, J.U. Sun and S. Lee, "Hierarchical approach to Vehicle Routing and Scheduling with Delivery and Installation using the Genetic Algorithm", International Journal of Industrial Engineering: Theory, Applications and Practice, 2011 (in press).
  • S. Laddha, C. Wu, S. V. Atre, S. Lee, K. Simmons, S. J. Park, and R. M. German, “Characterization of Alumina Feedstock with Polyacetal and Ethylene-Propylene Wax Binder Systems for Micro Powder Injection Molding,” Powder Metallurgy, 2011 (under preparation)
  • Lee, S., Lim, H.P., and Kim, K.C., “A Genetic Algorithm for Heterogeneous Vehicle Routing Problems from Multiple Depots with Split Deliveries”, Computers and Operations Research, 2011 (under preparation)
  • Lee, S., Lim, H.P., and Kim, K.C., “Robust Parameters Optimization for Genetic Algorithm of Multiple Depot Heterogeneous Vehicle Routing Problems Allowing Split Deliveries” Computers and Operations Research, 2011 (under preparation)
  • Lee, S., Lee, H.G., and Park N., “A Framework for Online Simulation for Sustainable Manufacturing”, submitted to Int. J. of Service Operations and Informatics (under preparation)
  • N. Park and S. Lee, “Ambient Intelligent Models to Remote Resource Control and Software Maintenance in Manufacturing Globalization”, Int. J. of Service Operations and Informatics, Vol. 5, No. 3, pp. 291-311, July 2010
  • S. J. Park, S. Ahn, T. G. Kang, S. T. Chung, Y. S. Kwon, S. H. Chung, S. G. Kim, S. Kim, S. V Atre, S. Lee, and R. M. German, “A Review of Computer Simulations in Powder Injection Molding,” International Journal of Powder Metallurgy, Vol. 46, No. 3, pp. 37-46, May 2010. (30 * 1.25)
  • S. G. Laddha, C. Wu, S. J. Park, S. Lee, S. Ahn, R. M. German, and S. V. Atre, “Characterization and Simulation of Macroscale Mold-filling Defects in Microminiature Powder Injection Molding,” International Journal of Powder Metallurgy, Vol. 46, No. 3, 2010, Vol. 46, No. 3, pp. 49-58, May 2010. (30 * 1.25)
  • Urval, R., Lee, S., Atre, S.V., Park, S., and German R.M, “Optimization of Process Conditions in Powder Injection Molding of Microsystem Components using a Robust Design Method: Part II. Secondary Process Parameters”, Powder Metallurgy,Vol. 53, No. 1, pp. 71-81, March 2010. (70*1.25)
  • S. Ahn, S.J. Park, S. Lee, S.V. Atre, and R.M. German, "Effect of Powders and Binders on Material Properties and Molding Parameters in Iron and Stainless Steel Powder Injection Molding Process," Powder Technology, Vol. 193, No.2, pp.162-169, July 2009 (30*1.25)
  • Laddha, S., Vallury, S., Lingam, G., Lee, S., Simmons, K., Thomas, P., Levenfeld, B., Varez, A., Park., S., Ahn, S., German, R.M., Atre, S.V., “Characterization of Alumina Feedstock with Polyacetal and ethylene-propylene wax binder systems for micro powder injection moulding”, Powder Injection Molding International, Vol. 3 No. 3, pp. 64-70, September 2009.
  • Urval, R., Lee, S., Atre, S.V., Park, S., and German R.M, “ Optimization of Process Conditions in Powder Injection Molding of Microsystem Components using a Robust Design Method: Part I. Primary Process Parameters ”, Powder Metallurgy, Vol. 51 No. 2, pp. 133-142, June 2008. (70*1.25)
  • Wu. C., Atre, S.V., Laddha, S., Lee, S., Simmons, K., Park, S., German R.M., and Whychell, Sr. D.T., “Material Homogeneity in Powder Injection Molded Ceramic Microchannel Arrays”, Powder Injection Molding International, Vol. 2 No. 2, pp. 68-73, June, 2008.
  • Lee, S., “Locating Idle Vehicles in Tandem-Loop Automated Guided Vehicle Systems to Minimize the Maximum Response Time”, Industrial Engineering & Management Science 6, No. 2, pp. 125-135, 2007.
  • Lee, S. and J.A. Ventura, “Construction of c-Broadcast Networks,” Telecommunication Systems 24, No. 1, pp. 47-59, 2003 ? SCI.
  • Lee, S. and J.A. Ventura, “An Algorithm for Constructing Minimal C-Broadcast Networks,” Networks 38, No. 1, pp. 6-21, 2001 ? SCI.
  • Lee, S. and S. Park, “Development of Data Structure and Integrated Modules for Projective Scaling Algorithms for LP,” Journal of Special Interest Group on Information Technology, The Korean OR/MS Society, Vol. 6, No. 1, pp. 40-54, 1993

 

Workshop Papers

S. V. Atre, C. Wu, S. Laddha, K. Simmons, S. J. Park, S. Lee, and R. M. German, “Material Homogeneity in PIM: Characterization & Simulation,” micro PIM Workshop 2009, Orlando, FL, USA, March 4-6, 2009.

Articles

“Abstracts - Literature Review,” Metal Powder Report (The international magazine of the powder metallurgy industry), No. 2, pp. 37, February 2009, from the paper: C. Wu, S. V. Atre, S. Laddha, S. Lee, K. Simmons, S. J. Park, R. M. German, and D. T. Whychell, Sr., “Material Homogeneity in Powder Injection Molded Ceramic Microchannel Arrays,” PIM International, vol. 2, no. 2, pp. 68-73, 2008.

Peer-Reviewed Conference Papers

2017

  1. Y. Zhou, A. Das, X. Gao and G. M. Lee, “A Bi-objective Mathematical Programming for Medical Relief Shelter Location Problem”, The Second Global Conference on Theory and Applications of OR/OM for Sustainability, September 6-8, Beijing, China.
  2. M. I. H. Amir, F. A. Rosyidah, K. Na, G. M. Lee, "An Agent-Based Simulation Framework in Nuclear Disaster Evacuation", The Second Global Conference on Theory and Applications of OR/OM for Sustainability, September 6-8, Beijing, China.
  3. J. Gu and G. M. Lee “Ambulance routing to minimize the radiation exposure dose in nuclear disasters”, The Second Global Conference on Theory and Applications of OR/OM for Sustainability, September 6-8, Beijing, China.

2016

  1. J. Gu, Y. Zhou and G. M. Lee, “Medical Relief Shelter Location Considering the Severity of Patients Under Limited Relief Budget”, The 46th International Conference on Computers & Industrial Engineering, October 29-31, Tianjin, China.
  2. K. Na and G. M. Lee, “A Framework of Agent-based Simulation for Nuclear Disaster Emergency Evacuation”, The 46th International Conference on Computers & Industrial Engineering, October 29-31, Tianjin, China.
  3. Y. Zhou and G. M. Lee, “Linking the Optimization to the Art; an Efficient K-Continuous Line Drawing Using Image Segmentation, Stippling, and the Traveling Salesman Problem”, The 2016 International Symposium on Semiconductor Manufacturing Intelligence, August 7-10, Hsinchu, Taiwan.

2014

  1. D. Y. Park, B. R. Park, J. Y. Lee, G. M. Lee, W. B. Hwang and SJ Park, “Development of Hydrophobic Forcep for Robot Surgery”, The 11th International Conference on Ubiquitous Robots and Ambient Intelligence, November 12-15, Kuala Lumpur, Malaysia

2013

  1. S. Lee, S. Kim and I. Moon, “Management of Standard and Foldable Container Operations through the Empty Container Repositioning and the Contracted Lease”, The 9th International Conference on Intelligent Manufacturing & Logistics Systems, February 27 - March 2, Shanghai, China
  2. I. K. Singgih, J. P. Park and S. Lee, “Military Deployment Planning with Multimodal Transportation Assets”, The 9th International Conference on Intelligent Manufacturing & Logistics Systems, February 27 - March 2, Shanghai, China
  3. B. Kwon, F. S. Kim, and S. Lee, “Spatial Scheduling for Large Assembly Blocks in Shipbuilding”, The 9th International Conference on Intelligent Manufacturing & Logistics Systems, February 27 - March 2, Shanghai, China

2012

  1. K. C. Kim, S. Lee, and J.I. Sun, “Hierarchical approach to Vehicle Routing and Scheduling with Delivery and Installation using the Genetic Algorithm”, The 2012 International Conference on Logistics and Maritime Systems, Bremen, Germany, August 22-24, 2012
  2. S. Lee, I. Moon and J. H. Lee, “Sea-based Military Logistics for Aerial Distribution to Support Combat Units”, 17th International Symposium on Inventories, Budapest, Hungary, August 20-24, 2012
  3. S. Lee, K. Ryu, M. Shin, S. Lee, K. A. Kurniadi, “Manufacturability Evaluation of Mold Manufacturers for Supplier Discovery”, Flexible Automation and Intelligent Manufacturing (FAIM2012), June 10-13, Helsinki, Finland
  4. K. A. Kurniadi, K. Ryu, Y. Park, S. Lee, “Green Product Development for Sustainable Manufacturing using Green-BOM”, Flexible Automation and Intelligent Manufacturing (FAIM2012), June 10-13, Helsinki, Finland
  5. S. Lee, S-J. Park, Y.S. Kwon, “New Development and Trend in Korean Powder Injection Molding”, 2012 World Congress on Powder Metallurgy, Proceeding of PM2012, October 8-10, Yocohama, Japan

2011

  1. S. Lee, S. J. Park, A. Arockiasamy, R. M. German, “Bio-Inspired Design for Porous Metal Composites”, Proceeding of MetFOAM 2011, 7th International Conference on Porous Metals and Metallic Foams, September 18 – 21, BEXCO, Busan, Korea
  2. S. Lee, S. J. Park, R. M. German, “Issues and Trends in Powder Injection Molding; Research and Applications”, Proceeding of Institution of Engineering and Technology (IET) International Conference on Advanced Technology of Design and Manufacture (ATDM 2011), November 3-5, Changzhou, China

2010

  1. K. C. Kim and S. Lee, "Hierarchical Approach to Vehicle Routing Problem for Delivery and Installation", September, Busan, Korea, 2010.
  2. S. Lee and W. Denkaew, "Operating Yard Cranes over Storage Blocks to Minimize the Handling Time in a Container Yard", September, Busan, Korea, 2010.

2009

  1. S. Ahn, S. Lee, S. J. Park, S. V. Atre, and R. M. German, “Effect of Powders and Binders on Rheological Behavior and Molding Parameters in Powder Injection Molding Process,” PIM 2009 International Conference on Powder Injection Molding & Workshop on Medical Applications, Orlando, FL, USA, March 2-5, 2009.
  2. S.V. Atre, S. Laddha, C. Wu, S. Lee, K. Simmons, S.-J. Park and R. M. German, “Material Homogeneity in Ceramic Microarrays”, PIM 2009 International Conference on Powder Injection Molding & Workshop on Medical Applications, Orlando, FL, USA, March 2-5, 2009.

2008

  1. R. M. German, C. Wu, K. Simmons, S. Laddha, S. Lee, D. T. Whychell, Sr., S. J. Park, and S. V. Atre, “Characterizing Material Homogeneity in Ceramic Microarrays Fabricated by PIM”, PIM 2008 International Conference on Powder Injection Molding of Metals, March 10-12, 2008, Long Beach, CA.
  2. R. M. German, S. Laddha, C. Wu, K. Simmons, S. Lee, S. J. Park, and S. V. Atre, “Effect of Binder System on Mold Filling in Ceramic MicroPIM”, PIM 2008 International Conference on Powder Injection Molding of Metals, March 10-12, 2008, Long Beach, CA.
  3. S. Lee, H. Singh, S. J. Park, S. Atre, and R. M. German, “Mapping between Material Design and Properties Using Material Informatics for P/M Simulation,” Proceedings of the 2008 World Congress on Powder Metallurgy & Particlate Materials (World Congress PM 2008), complied by R. Lawcock, A. Lawley, and P. J. McGeehan, Metal Powder Industries Federation, Princeton, NJ, USA, Part 1. Design & Modeling of PM Materials, Components & Processes, pp. 20-26, Washington, D.C., USA, June 8-12, 2008.
  4. S. Laddha, C. Wu, S. Atre, S. Lee, K. Simmons, S. J. Park, and R. M German, “The Effect of Feedstock Composition on Defect Evolution in Powder Injection Molded Ceramic Microarrays,” Proceedings of the 2008 World Congress on Powder Metallurgy & Particlate Materials (World Congress PM 2008), complied by R. Lawcock, A. Lawley, and P. J. McGeehan, Metal Powder Industries Federation, Princeton, NJ, USA, Part 4. Powder Injection Molding (Metals & ceramics), pp. 153-165, Washington, D.C., USA, June 8-12, 2008.
  5. Park, S., Yao, T., and Lee, S., “Comparative Studies of Stochastic Portfolio Construction Models with Geometric Average Rate of Return”, Proceeding of 2008 Industrial Engineering Research Conference, Vancouver, BC, 2008
  6. Choomlucksana, J., Park, S., and Lee, S., “An Ant Colony System for Open Vehicle Routing Problems with Time Windows”, Proceeding of 2008 Industrial Engineering Research Conference, Vancouver, BC, 2008
  7. Behmardi, B., and Lee, S., “Dynamic Multi-commodity Capacitated Facility Location Problem in Supply Chain”, Proceeding of 2008 Industrial Engineering Research Conference, Vancouver, BC, 2008
  8. S.V. Atre, C. Wu, K.L. Simmons, S. Laddha, K. Jain, S. Lee, S.J. Park, R.M. German, “Ceramic Microarrays for Aggressive Environments”, NSTI Nanotech 2008: Photonics, Sensors, Fluidics, Modeling, and Simulation-Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, Vol 3, pp. 405-408,
  9. Wu, C., Laddha S., Atre, S.V., Lee. S., Simmons K., Park, S-J., and German, R.M., “Process and Material Issues in Ceramic Micro Powder Injection Molding”, Proceeding of 18th International Conference and Exhibit MOLDING 2008, San Francisco, CA, 2008.

2007 and prior years

  1. Abinkar, B., Lee, S, and Paul. B. K., “A Conformal Membrane Microvalve for the Plug- Flow Reaction of Nanomaterials, Proceedings of 2007 Industrial Engineering Research Conference, Nashville, TN, 2007.
  2. Lee, S., Funk, K., Feuerbacher, R., and Hsiao, Y, “Development of an Emergency C-Section Facilitator Using a Human-Machine Systems Engineering Approach”, Proceedings of 2007 Industrial Engineering Research Conference, Nashville, TN, 2007.
  3. Park, N. and Lee, S., “Application of Bayesian Network Approach to New Product Development Processes to Increase Semantic Interoperability”, Proceedings of 2007 Industrial Engineering Research Conference, Nashville, TN, 2007.
  4. Lee, S., “Web-based remote machine control system in Java,” Conference of Network Intelligence: Internet-based manufacturing, Proceedings of SPIE, Nov 2000, Boston, MA, pp. 1-10.
  5. Lee, S., “Simulation code generation on the WWW using object-oriented manufacturing resource model,” Conference of Network Intelligence: Internet-based manufacturing, Proceedings of SPIE, Nov 2000, Boston, MA, pp. 84-95.
  6. Lee, S. and J. Braidic, “An Object Oriented Resource Information Model for Manufacturing,” Proceedings of ’99 Industrial Engineering Research Conference, Phoenix, AZ, 1999.
  7. Lee, S. and R. Doraiswamy, “A Framework for a Worldwide Process Planning System in Virtual Enterprises,” Proceedings of ’99 Industrial Engineering Research Conference, Phoenix, AZ, 1999.
  8. Lee, S. and S. Park, “Data Structure with the Minimum Storage in IIPA (Integrated Interior Point Algorithm),” Proceedings of ’93 Conference of the Korean OR/MS Society, Seoul, Korea, 1993.